Confirmation applications

HOW TO CONFIRM APPLICATIONS

  1. Grab the supplies .

Gather the supplies you need to iron the appliqué onto your clothing

  • Iron
  • Ironing board
  • Garment
  • Application

  1. Place the clothes flat on the ironing board

Lay the garment where the application will be applied flat on the ironing board. To ensure that the surface for the application is as flat as possible, first iron the area where the application will be applied

  1. Place the application in the chosen location.

Place the appliqué on your garment. The bottom of the appliqué flat on the fabric where you want it.

  1. Turn on the iron.

Set the iron to setting 2 (150 – 160 degrees). Then iron the application onto the fabric with a lot of pressure and light movement. Do this for about 60 seconds.

An application cannot be made on plastic and oiled materials (such as leather).

Make sure that the steam function is off and that the water tank is empty.

If you have a press then 12-15 seconds at 160 degrees. You press directly on the foil and please let it cool before the foil is removed.

  1. For best results, allow the foil to cool thoroughly.

Once you have ironed the application, turn the fabric over and iron the back of the fabric

again for about 30 seconds. Then let the fabric and the attached foil cool down and remove the foil in cold water.

  1. Remove foil.

Carefully peel off the foil. Preferably starting at the sides without small parts.

  1. When removing the foil, a piece of the application is not properly adhered?

If, when removing the foil, you notice that a spot has not yet adhered perfectly, do not pull it through but iron over it again briefly so that it adheres equally well to the fabric and then remove the foil.

  1. Washing a garment with application.

Always wash the garment with the application at a maximum of 40 degrees and inside out. Do not tumble dry and do not iron over the garment.

Enjoy your purchase!